MK4 x-end-clip for LM10UU or drylin RJUM-01-10

I have igus drylin bearings with the matching rods on my MK3S+ and now that the MK3.9 upgrade is on the way, I'd like to keep them and use it on the new Z axis rods. Unfortunately the elongated version is not available from Igus, so either one or two normal ones can be used. I opted 2, but the 2 normal ones are 3 mm longer than the elongated one (otherwise drop in replacement). This meant I need a new clip to hold them in place, thus this mod.

There are two versions, one is similar to the original one and one with a 3mm tall lip on the bottom.

Print the normal one as you would print the original part, print the lipped one with the lip on the print bed. No supports are needed.

You need only one version, I added the lipped one just for the looks.

Refinements may come as I get the new parts and assemble the printer. Check back time-to-time if you are interested in changes. The changelog will be added as the model is updated.

Changelog