RGB DOUBLE HELIX LAMP - easyprint

3D printed double helix lamp
printing hints:
all 3d parts can print without support, only add brim to some parts (diffusers and helix, but I printed diffusers without brim),
I printed this diffusers with glow in the dark PLA in vase mode very slowly (16 minutes per part or slower and print environment temperature around 25 degree celsius),
print height for helix needed is 200 mm (print time 5 hours per part),

electronic parts :
arduino nano
WS2812B strip 2x 14 LED's (60 leds per meter) 10 mm width!
micro switch (6x6x10)
power outlet and power supply (or use usb power)

In my video I have used some examples from the fastled library to show you some possible effects and how beautiful a rainbow can look. ;)
I am very curious about the programs and functions that you implement. Would be great if one or the other would share their example code.

Print Settings

Printer Brand:

Prusa

Printer: 

I3 MK3S

Rafts:

No

Supports: 

No

Resolution:

0.2 - 0.3

How I Designed This

Category: Electronics