April 5, 2021
Description
If your mesh door keeps falling out of the track it may because your door did not come with a top track such as mine did. This print will fix that.
Print up to as many as you need then put glue on the back and slide them into the top track slot.
Each individual piece is 200mm in length. if you want a shorter one then you can use a plane cut.
DO NOT SCALE THIS MODEL!!
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
.2 or less
Infill:
10-15%
Notes:
Print with 3 or four Perimeters/Shells
Print with the T upside-down, so that bed adhesion and no supports.
License:
Creative Commons — Attribution — Share Alike
Jack Frost
