Prusa XL series: Ultimate Hotend Holder (update: x16 Version with added Toolholders)

I dont like to change only the nozzle on the XL (i love it on the Revo) , so i prefer to change the whole hotend. So ive ordered a bunch of different nozzle sizes with the rest ob the Hotend. I also ordered some colored silikon socks to see the nozzle size at first glance. 
And because i needed a storage solution for them, i made the ULTIMATE HOTEND MOUNT .
 

At one of my first designs, i noticed, that the Heater Cardridge and PTC cables are kinda in the way. So i made them each individual channels,  where it is easier to get them out.
You mount it on the top right side, on the Aluminum Extrusion with 2 T-Nut and 2 m4 Screws,
 

update: x16 Version with additional Toolholders

After many asked me how they could support me, you can now 

Tip me on KO-FI by klicking here:

                                                      https://ko-fi.com/surfalex2000

Check out my other optimized XL Parts! There is a Series to come!

You can find them in my Collection:
https://www.printables.com/@Surfalex2000/collections/830114