September 4, 2024
Description
This is a model of the rebuilt portal door from the show The Owl House.
| Dimensions | Length | Width | Height |
|---|---|---|---|
| 54mm | 235mm | 154mm |
There are several options for how you can print this model. The photos show color parts with static wings.
Everything is printed in one part. This is not meant to be printed in multiple colors. If you want colors with this version, you will have to paint it.
Print “toh_door-rebuilt one part”, or “toh_door-rebuilt one part short”. On “toh_door-rebuilt one part”, the stairs on the front are flattened, reducing the length to 18.4mm.
Supports on buildplate are required. I recommend using adaptive layer height.
The model is split into parts according to their color.
You can print either “toh_door-rebuilt base” or “toh_door-rebuilt base short”. On “toh_door-rebuilt base short”, the stairs on the front are flattened, reducing the length to 18.4mm.
| Part | Layer Height | Color | Supports |
|---|---|---|---|
| “toh_door-rebuilt base” or “toh_door-rebuilt base short” | 0.1mm | Start with brown, change to silver after 2.5mm and back to brown after 3.8mm | Yes |
| “toh_door-rebuilt door eye” | 0.05mm | Yellow | No |
| “toh_door-rebuilt door eye filling” | 0.05mm | Black | No |
| “toh_door-rebuilt ring” | 0.2mm | White | Yes |
| “toh_door-rebuilt ring bit” | 0.1mm | Gold | Yes |
You have two options for the wings.
The wings are fixed and can not move.
Print two copies of “toh_door-wings static”. ("toh_door-wings static" contains two wing halves, giving you a total of four wing halves)
No supports required. Recommended Layer Height is 0.15mm. Start with gold, change to white at 1.7mm and back to gold at 2.15mm.
The wings can open and close. Due to the small size, they can be a bit tricky.
| Part | Layer Height | Color | Supports |
|---|---|---|---|
| “toh_door-wing base” | 0.2mm | Start with gold, change to white after 4mm | Yes |
| “toh_door-wing feather 1” | 0.1mm | Gold | Yes |
| “toh_door-wing feather 2” | 0.1mm | Gold | Yes |
| “toh_door-wing feather 3” | 0.1mm | Gold | Yes |
| “toh_door-wing feather 4” | 0.1mm | Gold | Yes |
| “toh_door-wing feather 5” | 0.1mm | Gold | Yes |
| “toh_door-wing cover” | 0.1mm | White | Yes |
| “toh_door-wing bolt” | 0.1mm | Gold | No |
For Assembly, stack the feathers onto the rod of the base. Put the cover on top so that it aligns with feather 5 and glue it to feather 5. Insert the bolt through the cover into the base and glue it to the base.
The files “toh_door-rebuilt door” and “toh_door-rebuilt door no eye” contain only the door.
On “toh_door-rebuilt door” everything is in one part.
On “toh_door-rebuilt door no eye” you will also need “toh_door-rebuilt door eye” (yellow) and “toh_door-rebuilt door eye filling” (black) for the eye.
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#
License:
Creative Commons — Attribution
DanielAlex
