November 3, 2023
Description
This is a replacement for the Farberware vegetable peeler part that holds the blade.
The old blade is use in the replacement part and a pause in the g-code allows the blade to be inserted into the part as it is being printed. The direction of print and use of support material enables the blade, which is tapered, to be inserted with the largest flat side at the top. PETG was used and no glue is needed.
The two pivot holes on the handle were increased to a 3.5mm diameter. This allows the two pins to be stronger.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Teraflop
