Zen garden: bridge, fence, tables and chair

A set of miniature garden furniture - a bridge, a fence, a chair and two sizes of table.

Printing is relatively fast, as the furniture is miniature 😊

You can print the bridge in place, but the supports are crutial and I can't guarantee a good result. Or you can print the bridge without supports (as I did) - every part individually. You would need to print 2 arches and 13 planks. Then simply glue them together 🙂

The process of creating this garden:

1. Print every piece of furniture you like. The chair needs supports!
2. Sand and smooth every single piece.
3. Spray with primer for plastic.
4. Paint with acrylic paint of your choice.
5. Assemble the bridge, if you printed every part individually.
6. Assemble the garden and enjoy every second of it 😁

 OR!

Print with tiny layer height (0.1 or 0.15 mm) and with the final colored filament 😀 No need for postprocessing (you only need to remove the supports from the chair, it takes roughly 10 seconds of your life 😀)

Thanks for your feedback, happy printing and assembling! 😊