Trail Cam Mount and Tree Plate

***UPDATE***

I've combine a couple of models so all the options are in one place from which to choose.  

The Tree Plate aids in stabilizing the mount if you can't get a nice tight fit with just the basic camera mount.

I've also adjusted the mount to extend further down so the Tree Plate is not necessary.  

******

You should print these in PET or PETG.

To print: split the .stl into objects and face the backs to the bed (so that the teeth are on top.)  I used 25% infill.  If you're concerned about the bolt hole strength, increase the parameters to 4 or 5.

All you need is:

• two ¼" by 20 TPI bolts -one 1 1/2"  long (that threads into the camera) and the other 2" long that hold the two pieces together
• two wing nuts - one to hold the pieces together and one that tightens the fit onto the camera
• one thin ¼" x 20 jam nut to hold the camera mount bolt in place against the mount