Prusa Mini Phaetus Draongfly Hotend BMS

I got a partially kit of a Prusa mini From a friend but some parts were missing. First and foremost the hotend. So I came up with a quick design to mount one of the hotends I had laying around to my machine.
In addition to the "original" parts you'll need the following:

1x M3x20 button head or cap head screw (fanduct to carriage)
1x M3x14 countersunk screw (fanduct to carriage)
2x M3x12 button head or cap head screw (hotend to fanduct)

• 1x Phaetus / Trianglelabs Dragonfly BMS Hotend
• 4x M3x5x6 Threaded Insert
• 1x x-carriage printed from PETG, ABS or ASA
• 1x fanduct printed from PETG, ABS or ASA

The fanduct piece should be printed with support at the front intake (hotend mount).