November 26, 2023
Description
Cute Reindeer
Prints flat without any support, you will need about 20 grams of filament and half an hour at 100% scale in one color.
You can make it multicolored by painting the antlers or adding a filament change at height.
Print Settings
Material: PLA / PETG
Layer height: 0,20 mm
Nozzle diameter: 0,4mm or 0,6mm
Infill: 10-12%
Perimeters: 2
Supports: no
Orientation: flat as in original file
this is one member of my original "HomePals" collection that you can see here:
________________________
You can find other exclusive models on this collection, and license to sell physical prints in my patreon.
https://www.patreon.com/meafdesigns
________________________
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
MEAFdesigns
