January 11, 2022
Description
Made a charging phone dock for my Apex Qi charger. This charger is quite a bit larger than other Qi chargers.
The dock has a tunnel for the micro-usb cable to go through.
Regarding infill: I printed the base at 8% to save time and material. I was worried that the arms will be fragile at 8%, so I changed them to 25%. Most slicers let you change slicing parameters at different heights - so up the infill at about 50mm height and upwards.
No supports or brim needed.
License:
Creative Commons — Attribution — Share Alike
MoshiBin
