Voron 2.4 Skirt Insert

Voron 2.4 Hexagon Skirt Insert

Hexagon skirt inserts for the Voron 2.4, designed for models 250, 300, and 350mm. 
The insert can be pressed into the skirt from the rear, reducing openings and adding a touch of color to your printer.

The required STL files per printer are as follows:

Use the test insert.stl to verify the dimensional accuracy of your printer and check for any deviations in tolerances.

Voron 2.4 250mm:

• 2x Voron 2.4 side skirt insert (mid).stl
• 2x Voron 2.4 250 side skirt insert (a).stl
• 2x Voron 2.4 250 side skirt insert (b).stl
• 1x Voron 2.4 250 front skirt insert (a).stl
• 1x Voron 2.4 250 front skirt insert (b).stl

Voron 2.4 300mm:

• 2x Voron 2.4 side skirt insert (mid).stl
• 2x Voron 2.4 300 side skirt insert (a).stl
• 2x Voron 2.4 300 side skirt insert (b).stl
• 1x Voron 2.4 300 front skirt insert (a).stl
• 1x Voron 2.4 300 front skirt insert (b).stl

Voron 2.4 350mm:

• 2x Voron 2.4 side skirt insert (mid).stl
• 2x Voron 2.4 350 side skirt insert (a).stl
• 2x Voron 2.4 350 side skirt insert (b).stl
• 1x Voron 2.4 350 front skirt insert (a).stl
• 1x Voron 2.4 350 front skirt insert (b).stl

Recommended print settings:

Material: ABS or ASA.
layer height recommended: 0.2mm.
Extrusion width recommended: Forced 0.4mm.
Fill Type: Grid, Gyroid, Honeycomb, Triangle or Cubic.
Infill percentage recommended: 40%.
Wall count recommended: 4.
Solid top/bottom layers recommended: 5.

Printable without support

→ Please follow more designs soon !!! ←