GrinchTree is here, carrying evil plans to takeover your home decoration for Xmas!!
Can be used in the following combinations:
Half Christmas tree with Grinch filament painting
Grinch filament painting only, as wall decoration
Join 2 half's of the Christmas tree model to make a full Christmas tree
Added two colour choices Green (to combine with Green Tree) and Grayscale (my traditional style to combine with Silver, Black or White Tree).
As usual, print the Filament Painting part with 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Use the same model with the following colours:
Filaments Used:
PLA Overture Black
PLA PolyTerra Charcoal Black
PLA Overture Cement Gray
PLA Ziro Dark Gray | or PLA Sunlu Gray
PLA BambuLab Basic Gray
PLA Ziro Light Gray | or Overture Light Gray
PLA Overture White
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Charcoal Black
At layer #9 (0.8mm) swap to Cement Gray
At layer #11 (0.96mm) swap to Dark Gray
At layer #14 (1.2mm) swap to Gray
At layer #20 (1.68mm) swap to Light Gray
At layer #22 (1.84mm) swap to White for the rest.
Filaments Used:
PLA Overture Black
PLA PolyTerra Charcoal Black
PLA Ziro Translucent Green
PLA Ziro Fluo Green
PLA+ eSun Green
PLA Overture White
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Charcoal Black
At layer #10 (0.88mm) swap to Translucent Green
At layer #21 (1.76mm) swap to Fluo Green
At layer #26 (2.16mm) swap to eSun Green
At layer #28 (2.32mm) swap to White for the rest.
Enjoy my work? Support me by joining my club. Tier 1 offers exclusive models, while Tier 2 allows you to sell my 3D printed artwork.
Don Matis
