Spin Top - spins for ages ...

Spin top: print them both as shown on the image with supports; then screw the handle into the spin top, then spin, spin, spin, spin...

Did I mention that you can spin this thing?

If you are able to print with dual colors on your printer, you can print the handle and the skirt in different colors.

The thread on the original file goes left (!!!); for this reason: when you screw the handle in, turn it left; hopefully it will not get lose when you spin. Or now you can print the “_right thread.stl” files instead!

When you print the handle - it's recommended to print it with 100% infill, because the one I printed with 20% infill - broke off right on the threads. Printing both things with supports will take about 1 hour 29 minutes.

I made another version with threads going to the right side and I also added a little top, sticking out on the bottom of the skirt, hopefully it will make it spin more and better.