Flower pot with integral pole

The flower pot for a tall plant with self centering tray and integral pole. The hole for pole has 13.3 mm diameter for wooden pole ~13 mm diameter.

Print settings (pot / tray):

• Layer height: 0.2 mm
• Perimeters: 5
• Extrusion Multiplier: 1.03
• Supports: No
• Material: Prusament PETG
• Nozzle temperature 250°C / 255°C (first layer / other layers)

The pot and tray models are quite big and printing them with layer height 0.2mm results in long print. To be on safe side I used some recomentadions from Watertight prints. The tray was printed with extrusion multiplier 1.1, but next time I would use 1.03. Extrusion multiplier 1.1 seams be to much, the surface has signs of overextrusion. The pot was printed with extrusion multiplier 1.03 - the surface looks nice. Both models: pot and tray have "mouse ears" to prevent detaching of print from the print bed - to be removed from finished print. "Mouse ears" are added as result of printing of the tray where one edge slightly went up (the print ended successfully and is in use).