August 8, 2024
Description
Here is a strong holder for the Apple Airtag compatible with MOLLE and PALS (25 mm / 1 inch webbing) systems.
It is possible to put the airtag both ways, facing front or back (if you need to be able to stop tracking/bipping easily).
I recommend using PETG or PLA.
I recommend printing at 0.3mm height max, on its side, no need for support (see screenshot).
If you don't have a printer, I uploaded it on Shapeways, so you can get it printed for you, plus the finish will be much better.
If you appreciate my work, you can buy me a coffee. Appreciated !
License:
Creative Commons — Attribution — Noncommercial
Thomas
