PS4 Controller Holder 3D Printer File Image 1

PS4 Controller Holder 3D Printer File Image 2

PS4 Controller Holder 3D Printer File Image 3

PS4 Controller Holder 3D Printer File Image 4

PS4 Controller Holder 3D Printer File Image 5

PS4 Controller Holder 3D Printer File Image 6

PS4 Controller Holder 3D Printer File Image 7

PS4 Controller Holder 3D Printer File Thumbnail 1

PS4 Controller Holder 3D Printer File Thumbnail 2

PS4 Controller Holder 3D Printer File Thumbnail 3

PS4 Controller Holder 3D Printer File Thumbnail 4

PS4 Controller Holder 3D Printer File Thumbnail 5

PS4 Controller Holder

Ty10y

June 9, 2024

Description Comments Tags

Description

Behold, 3D Printing and Gaming Enthusiasts!

This is my solution for a PS4 controller holder that just works. I needed a holder that worked for me and had the features I wanted most, so I designed this print to include the following features:

Can mount on a wall using just command strips
Don't need to unplug the cable to hang it up
Easy to use, but holds the controller securely

Print in one piece See the section "Print Settings" for the two ways to print this model. As always, if you have any suggestions to improve my designs or just have question, let me know in the comments.

Thanks!

- Ty10y

Print Settings

Layer Height	0.2mm recommended
Perimeters	More = stronger
Infill	Any
Supports	Needed for “orientation 1", not for “orientation 2”
Raft/Brim	Recommended if printing “orientation 1” to help with bed adhesion
Skirt	Not needed
Orientation	Print on it's side with support between the cable gap Laying flat with no supports (beware steep overhang angles and fillets)
Notes	See below for orientation pictures