December 19, 2023
Description
0.15 mm layer height, 0.97 flow rate. Print slower (90 mm/s works fine), cooler (PLA 205° C) with lots of cooling.
Use sharp knife or spatula to separate individual layers of spring apart. Be careful not to cut yourself. Glue in eyes, nose, mouth and hat.
If you have trouble separating layers apart, please try different filament. The one in the pictures need to be separate using knife, but I have different PLA and this can be break free with bare hands only.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Martin
