June 11, 2021
Description
A compact and functional holder for all sorts of memory devices.
I was inspired by @3DHACKS's post (Cults). Although it was a bit big for me so I modelled a smaller version as scaling it would probably not work well with the holes.
It keeps the USB's mainly in one place for me and it looks good at the same time.
The overhangs are relatively steep but should not need support. This model can be scaled down slightly because the holes are not tolerance tight fit - I was worried about damaging the MicroSD cards if I made it too close.
0.4mm Nozzle
0.16mm Layer height
20% Infill
Z 45 x X 55 x Y 52 mm
License:
Creative Commons — Attribution — Noncommercial
Matty
