Exterior Gate holder

My yard gate has springs in the hinge that keeps the door closed wich is great most of the time but it's a real pain when you're moving stuff in and out.

I designed this stopper to keep it open when needed and so far it works great.

I printed this in its normal orientation but you could also print on its side, either way, you will definitely need some supports and yes they are a pain to remove but hey,….the part works.

Printed in PETG ….. ABS/ASA probably better…. but I didn't have any so… 

The vertical bars on my fence are 5/8 inch (approx. 16mm)

The latch rod is about 3/8 (a little under 10mm) but anything close will work.