Pet Game - Hide & Seek

A very basic game of "Hide & Seek" for puppets and kittens.
Just put a treat under each “cup” and let the game begin.

There is one larger version with 8 “holes” and a smaller one with 6.
Depending on the one you choose you need to print a corresponding number of “Cups”

There are 3 different “difficulty levels” to choose from.
4mm, 10mm and 20mm. The measurement relates to the depth of the hole which obviously makes it easier or harder to get rid of the cup in order to get to the treat. 4mm they can simply fold the cup with their paw, 20mm they most likely will need to use their teeth.
There is an additional “Cup” (Cup_Large) that you may wish to use for the 20mm difficulty level in order for your pet to get more room to get hold of it. This could also be used as another way of lowering or increasing the total difficulty.

To conclude:

• Choose a base, smaller or larger (6 or 8 holes)
• Decide on which height you want of the holes in the base.
  4mm very easy, 10mm easy, 20mm somewhat hard.
• Choose what height of the cup you want, standard or tall.
  Depending of your choice of base you can thereby create another dimension of difficulty.
  I.e. low base, tall cup = super easy
  High base, standard cup = a bit harder

It has been designed to be able to put a letter/logo or something else in the middle.
Simply remix it in your favorite tool.

As you can see from the pictures I have printed it using 2 colors, simply use a “change color” step in your slicer at the appropriate layer height.