Fitbit Charge 5 Dock

A charging dock that holds the connector in place while charging the watch. 

I've included 2 models: one for a thin wristband (pictured) and one for a thicker band.

I've also included the SCAD source in case you need to modify it for your needs.

Printing

Best to print on its side, with (preferably tree/organic) supports for the overhang on either side of the cable gap.

Post-processing

I added a piece of adhesive silicone sheet to the bottom to help it stick to the table. Stick-on or embedded magnets might be an option as well

Update: I've added a clip-on base that helps stabilize the dock.