Painted Finger Jordans (for MMU3)

This is a remix of my Finger Jordans model, manually painted on PrusaSlicer for the MMU (multi material unit).

Printing Tips

This print took approximately 10 hours on the MK3S+ MMU3 (for printing two shoes). Use the pre-sliced .3mf file and adjust the colors to your current filament arrangement (tip: use the bucket fill if you want to change some of the colors). This print uses 3 colors, extruders number 1, 3, and 5.

Used 0.20mm (speed) with 10% infill, no brim or supports needed.

Colors / Filament disposition used:

• Extruder 1: Prusament Galaxy Black
• Extruder 3: Sunlu Matt PLA Peach Pink
• Extruder 5: Sunlu Matt PLA Mint Green