Sidewinder X2 5015 Dual Fan Duct

This is a Artillery Sidewinder X2 fan duct for two 5015 fans. This part is not optimized for FDM printers. It can be printed with a lot of support but is easier to print on an SLA printer. I can recommend Sirayatech Build Resin.

There is also a plug that covers the mounting hole. This should be printed in TPU/TPC or TPE filament. I recommend TPC, it is very easy to print and has a good adhesion to textured PEI sheets.

What you also need:

1x M3x52 or 55 Screw

2x M3 washer

3x M3 nyloc nut

NOTE: The blue stepper cover will most likely not fit. I cannot test it because my sidewinder X2 is modded with a IT&E Wiring Upgrade Kit.

If you want to modify the duct or like to remix it you can find the STEP assembly in the attachments!