German Mid-Century Mantel Clock - "Dugena"

Because they simply cost an incredible amount - print them out! ;) 

The parts can all be easily put together with a bit of superglue - what goes where should be pretty obvious.. (or see “instructions” in the file descriptions).

• Tight Dimensions, so make sure your printer is accurate!

For the rear cover you need four 4x2 mm magnets.

The cover for the front clock hands is not tested.

I used this cheap movement here:
Amazon - I think any movement with these dimensions (56x56x15 mm) should fit.

Have fun and show me your makes - thank you! :-)