LENOVO ThinkCentre Wall and Under-Desk Mount

edit 02.11.2024:

• added version with screw holes on the top. For under-desk mounting.

edit 24.01.2024:

• Slots for the rubber feet set further towards the center.
• Curves instead of corners on the narrow bridges.
  
   

This wall bracket is mounted on the wall with four countersunk screws. Optionally, the ThinkCentre can also be secured with two thumbscrews.
 

Unfortunately, I made a few design mistakes in the construction. The hexagons should have been pointing upwards to avoid unnecessary bridges. Furthermore, the slot to create space for the rubber feet ensures that the outer bridges are interrupted. 

Nevertheless, in my case it has been printed very well. I recommend to print it with PETG and to dry it well to avoid stringing. No supports are necessary.

Happy printing!