Kettlebell V2 - upgraded for MMU

This is a remix of my Kettlebell keychain model, now with separate bodies to allow for easier MMU painting.

Printing Tips

I tried a few different combinations and my favorite was a light color for the body (mate green) and black for the handle and the number. I used 0.20mm (quality) with 100% infill to give it a nice weight. I used a brim to be on the safe side.

The included .3mf file has the pre-sliced model with painting. A few details for a perfect print:

• Make sure the seam is on the side of the model, so it doesn't ruin the numbers
• Make sure you set a higher purge volume when transitioning from dark to lighter colors (I used 340)
• More models means less waste. You can also set the model to purge to infill.

These are already set on the pre-sliced file, but you can double check especially if you change the painting.