Cable Guide for 20x20 extrusion

This is a very simple design for your flexible cable conduit so they won't be sloppy and dangling around. Use 2 zip ties and mount it to your 20x20 extrusion frame with M5x6 screws with t-slot nuts. Possible for cable conduits around 10- 15mm. (Mine is 12 mm)

Print instructions

Licence: Creative Commons - Attribution - Non-Commercial Category: 3D Printer Parts Print Settings

Printer: Hypercube

Rafts: No

Supports: No

Resolution: 0.2

Infill: 15%

Notes:

I printed it standing on the thinner side. If you have bad bed adhesion you might to print it with brim.