Trippy Himalayan Salt Lamp

A trippy Himalayan salt lamp. To achieve the effect you see in the picture you need to use the following settings in your slicer with white filament:

- 0.2mm layer height
- 2 perimeters (if the 0.2mm layer height hasn't set it already).
- 2% infill (yes 2%! it will print fine :D)
- gyroid infill type

Then simply get a cheap push button or wireless LED light and stick it to the bottom. Sometimes they are known as round cabinet or closet LED lights. The combination of 2 perimeters and 2% gyroid infill will give a cool effect!

Use the gcode file to do all the settings for you if you want.