Wave 1 PK Squire upgrades

⚠ PLEASE DOWNLOAD THE MANUAL AND READ IT BEFORE USE ⚠

Check out the original post here: PK Squire 

There were many requests from all of you after the release, so I tried to deliver most of them! If you made any modifications yourself, post them as a remix! All of these were possible thanks to your suggestions posted on the discord server: https://discord.gg/485rvMbyUh
 

Printable upgrades:

-Two new handguard options, 40 mm and 80 mm longer then the original.

-Three new spring cup options for preloading the spring for higher performance. You can choose from 2, 4, and 6 mm precompression.

-Taller aiming sights for higher sight picture

-New Plunger option with tighter seal, so you dont have to use tape on the original part.

Printable stand:
You can display your PK Squire with this easy to print 2 part stand. Assembly is straight forward, just slide the stump through the bottom of the base and secure it in place with two M3x10 socket head screws or superglue.

Print settings: 
Print these upgrades with the same settings as the original part, settings for the original parts are in the manual.

Don't forget to share your completed blaster as a make! Enjoy the build, and remember to use your blaster responsibly.


If you like this blaster and want me to publish more similar projects here, consider supporting me by buying me a coffee here: https://www.buymeacoffee.com/simonstupka 
Thanks a lot for all your support! 

The fileset is released publicly as a Non-commercial license. If you are interested in selling kits, please contact me.