Ahsoka’s Collapsing Shoto

This version of the lightsaber has been broken into different parts so they can be printed separately in different colors then glued together. There are locators for all the parts. The cap is screwed on so the blades can be printed separately then inserted or replaced.

None of the parts require supports, for best results use a .4mm nozzle. You can print the blades all at once concentrically or one at a time in vase mode. Find detailed instructions on how to print collapsing swords on my website.

I used Gorilla Glue (aff.) to glue mine together.

Printed on the Muldex rep-rap IDEX printer