V2 - Double Sink Basket

This is an update to my original sink basket - Double Sink Basket by FunctionalPrintGuy | Download free STL model | Printables.com

Changes from V1 - I changed the orientation of the mounting to prevent stagnant water and food from sitting in the rear channel.  V1 got pretty nasty over time.  By changing the mounting, less material is now required (the whole thing is less bulky) and there's more space in the basket with the same footprint.

I grew tired of the style with suction cups that would never stay attached to the wall of my double sink.  Designed this to fit over the center divider.

Print settings:

0.3mm layer height

PETG due to the exposure to hot water.  Recommend a darker color as it shows less dirt.

Print the mount on its side, with supports enforced for the piece that attaches to the basket.

Print the basket on the bottom, no supports needed.  Recommend a brim due to the sharp corners that are prone to warping.  There are a number of small overhangs that can be easily bridged.

3 perimeters

60% infill