Stromer ST3 / ST5 Garmin Mount for

This is a Garmin mount for the Stromer ST3 or ST5 with a comfort stem.

(This only has been tested and fitted to a ST3. The ST5 stem fits but not flush to the opening)

I wanted something where I can mount my existing Garmin GPS which fits perfectly in the mount on the handlebar stem. The original solution neither does fill up the complete base nor does is correct for the angle of the comfort stem.

The inlay is taken from https://www.thingiverse.com/thing:96504, if it is too loose or too tight you can download the original one and cut off from the bottom. The uploaded one here is 1.35mm, so 0.65mm cut off.

To mount it on the bike use the original screw which comes with the SP connect mount.

Note: The hole to fix it on the stem is covered to avoid support material. You have to drill the few layers after printing.

Print Settings

Printer:

Artillery Genius

Rafts:

Supports:

Yes

Resolution:

Category: Sport & Outdoors