Lego Saturn V vertical wall mount

This model is loosely inspired by the actual launchpad, but simplified so that its easy to print.

In the back of the bottom pad piece, there are 3 screw holes you can use to reinforce the layers. I printed this in PLA and should be fine, but the material is up to you.

No supports needed.
The vertical braces are slightly oversized (diameter by 2mm, so 1mm gap on each side). This is intentional, as i wanted to line it with felt. If you want to skip this, just scale down the braces in your slicer.

The are 2 types of braces for the bottom part. one with a cutout for the tube on the model. You can just print this piece 2x as it is the same size as the other one.

In the end, i only use the 2 bottom braces, but files include a brace for the top thinner part as well.