Multiboard 40g Glue Stick Holder

This holder was designed for 40 gram Elmer's glue sticks. The interior diameter is 31mm so it should work with many other large glue sticks or markers.

There are two versions of the model:

• One is press fit to use with Multiboard snap connectors, useful if you'd like to place it where your panels are joined. 
• The other is a snap connector and will fit directly into a Multiboard panel. This is the one in the photo but I did increase the wall thickness from 1mm to 2mm for the uploaded files.

I printed with PETG and the recommended Multiboard settings of 3 perimeters and 15% infill. 

That you to Jonathan of Keep Making for creation of Multiboard