EIGER | Cutting Board Rack

EIGER | Cutting Board Rack

Meet EIGER, a stylish rack to keep your cutting boards organized and dry.

You can pick between 2 options, depending of the thickness of cutting boards you use:

Option 1: slots of 15, 15 and 30mm.

Option 2: slots of 15, 20 and 40mm.

Happy printing!

DIMENSIONS (option 1) | W 140mm x D 110mm x H 156 mm
with slots of 15, 15 and 30mm.

DIMENSIONS (option 2) | W 140mm x D 126mm x H 156 mm
with slots of 15, 20 and 40mm.
 

3D PRINT SETTINGS 
The rack print on its side.
The STL file is already oriented properly.
100% print-in-place.
The racks in the pictures were printed in 0.25mm/layer.

Resolution: 0.2mm/layer
Wall line count: 2
Infill: 20~30%
Build adhesion type: ~4mm Brim
Supports: None

To get the line in a different colour than the rack like on the pictures, you can modify your Gcode to schedule a filament change at the layer where the colour change happens.

First, slice your model.

Then, in CURA go to:
Extensions > Post Processing > Modify Gcode > Add Script > Filament Change
And in there you input the layer where you need the filament change to happen.
Slice your model once again so it updates your Gcode.
And there you go! Ready to print!

In Bambu Studio,
after slicing, scroll the layer scroller on the right of the screen until you reach the layer where you want the filament to change.
Right click on your mouse and hit "pause" to schedule a filament change at that layer (or just select "filament change" if you have an AMS).
Then add another "pause" or "filament change" wherever you want the colour to change again.