Filament Box for Box from Kaufland

Another filament box. 

This one is for the box: “Spice & Soul Food Storage Container 4.7l” put upright.

It does not have a holder for a hygrometer or silica.

You need:

• 4 x Ball Bearing 608 (8mm inner dia, 22mm outer dia, 7mm width
• 2x M3 x 20mm (length of 18mm to maybe 40mm is fine)
• optionally 4x M3 x ~20mm for screwing trough the box

To print:

No support necessary, optimized for 0.2mm layer height.

• 2 x Roller.stl
• 1 x back_side.stl
• 1 x front_side.stl
• 1 x base.stl
• do not print full_model.stl

The base and the holder are designed to be screwed together trough the box. In the end I used double sided tape. 

The holder and the base/foot have an angle of 1° to match the angled box. Be aware of this when assembling. 

The foot is put on asymmetric because of the lid.