July 4, 2024
Description
Update 25.03.2024:
Added a parametric and customizable version of the stand.
Improvements
The model was developed to enable fast and material-saving printing and at the same time to be stable.
The print in size 25mm requires only 42g of material.
Compatibility
I have provided versions for all sizes from 10mm to 60mm. So the holder fits tablets, laptops, thinclients, mini-PCs and more.
When choosing the right variant, please make sure that you still need some tolerance to insert the laptop without scratching it.
Customization
Fusion 360 (free download) is required to adjust the parameter “spacing”.
Dimensions
Height: 61,26mm
Width: 100mm
Depth: depending on the variant
Print
I printed my stand in 0.28mm layer height with adaptive layer height (+-0.04mm) in PETG.
No Supports needed!
I used 20% infill and 3 perimeters - the stand is therefore very stable.
Some foam rubber or felt furniture glides can be attached to the down contact side.
Do you like my work? I would be very happy if you would support my work on Ko-fi.
License:
Creative Commons — Attribution — Share Alike
The Kit Card Guy
