October 16, 2021
Description
@samster_3D made the Money Bender 2 years ago (Cults 3D: https://cults3d.com/en/3d-model/home/money-bender and MyMiniFactory: https://www.myminifactory.com/object/3d-print-money-bender-84686 ), which I now remixed a bit. I lowered head from 3 different points, making it 1.8cm lower to make it look a bit more like original Bender. Also made money-hole a bit lower. As a European, I also changed dollar signs to euro.
I then added hands from @EugenioFructuoso ( https://www.thingiverse.com/thing:2560224 ), but I modded his design by removing cigar and beer bottle from his hands to print them separately with different color. Attachment point is curved to a shape of Pringles tube.
Also included are original versions in a 3mf -file (open with Microsoft 3D builder), if you rather paint the bottle and cigar or don't care if the are the same color.
Glue parts together.
I haven't decided if I should cover Bender's torso with aluminium foil or not. Post a make, leave a comment (foil or no foil) and click like :)
Printer Brand:
Creality
Printer:
Ender 3
No
Supports:
Yes
0.2
Infill:
10%
Notes:
You need supports to Bender's mouth and hands. On Benders head, set support overhead angle to 89% to avoid unnecessary supports. Use at least 3 walls, I used 4.
I used Cura's adaptive layers to reduce printing time and making round tops looking better.
Head, eye frame and antenna prints in about 9 hrs (adaptive layers, speed 60mm/s).
Eyes print in a bit over 1h. Hands take about 3 hours per hand. All together takes about 180 grams of filament.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
ippe
