Bicycle Piggy Bank

Want to save money for your new bicycle? Do it in style with this piggy bank!

I did this design for a friend who wanted to have a donation box at his information stand at the Viennese Critical Mass bike rides.

The bottom is a M30 screw, so you can easily open and close the bank.

Print Settings

Printer:

Snapmaker

Rafts:

Yes

Resolution:

N/A

Notes:

Front, Back and Screw can be printed without support, the Shell needs support for the screwhole and the slit.

Of course, you'll have to glue the parts together after printing :-)

I painted the raised bicycle black after glueing the parts together, and sprayed it with clear paint.

Note: I have only a small printer at the moment (Snapmaker, 125x125x125 build volume), so it is only a small piggy bank. You can scale it of course larger in your slicer, if you want/need. Just remember you'll have to scale all 4 parts to the same amount :-)