6 Channel Servo Tester Case

I got this 6 channel servo tester from Amazon and could not find a case for it, so I designed my own. Has openings to access everything from the top. I also made some custom buttons for the tactile switches since they will be harder to get to with the case.

I made this with a super tight tolerance (sorry, I can't help it!) so press fit should work well. Buttons just live in the sleeves in the lid so when putting them in, keep the lid facedown and being the servo case with tester in it and close it upside down.

Link to the Servo Tester: https://a.co/d/f1MfnfK

Print Settings

Printer Brand:

Bambulabs

Printer: 

Bambu X1C

Rafts:

Doesn't Matter

Supports: 

No

Resolution:

0.2

Infill: 

10

Filament: SUNLU PETG Any

Notes:

Unless you have amazing adhesion with small parts, I would print the buttons with a 10mm brim.

Category: Electronics