April 5, 2023
Description
About
This is a remix of zogzogzog's leveling nut for replacement of the stock leveling nuts under the bed. I've made a small change so it prints beautifully without supports. The original may also do so but this is easier to print as there are no overhangs.
It should fit the following printers:
QIDI: X-Max, X-Plus, X-Maker, X-Smart, X-One 2, X-Pro, I-Mate, I-Mate S.
Support
All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me a small donation using the link below. Thanks :)
https://www.paypal.me/humebeamengineering
BOM - Bill of materials
You need 3 x M4 hex nuts.
Printer:
QIDI Tech X-Max
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
25
Filament: Prusament ASA Jet Black
Notes:
Print it in strong filament like ABS or ASA or better. Infill 25% or higher.
License:
Creative Commons — Attribution — Noncommercial
7
humebeam
