Marvel Champions Hero Box

I designed this Marvel Champions Hero Box to fit a normal hero deck, sleeved (in Dragon Shield specifically), and to be labeled via a printed insert (cardstock/laminated preferred) slid into a slot. If your sleeves are taller than Dragon Shields then they may not fit. It is a snug fit for Dragon Shields but I had to make sure the vertical height still allowed for the box (Hobby Lobby Art Supply Box) to close with my game manuals on top.

I had issues with my hot-end at the time of printing these so the closed oval model had issues printing the top curve. You can see this in the pictures. So I also designed an open ended model.

When printing the labels you can slide more paper behind it to help keep it in place. I recommend printing them on cardstock and laminating them for the best fit and look.

Here is a link to the Hobby Lobby Art Supply Box vertical insert as seen in the pics above:
https://www.thingiverse.com/thing:5020083

Here is my old horizontal insert for the same box. I have since abandoned that design since the content outgrew the horizontal space limitation. This thing also has links to the box itself.
https://www.thingiverse.com/thing:4458169

Print Settings

Printer:

Prusa Mini

Rafts:

No

Supports:

No

Resolution:

.2

Infill:

.25

Filament: Printed Solid Jessie PLA PLA Various

Notes:

Make sure your printer is tuned well enough to print the thin walls for the label to slide into.

Category: Toys & Games