Easter Bunny Pot with Handle

A versatile model that can be used as bowl, pot, or bucket, with a handle that prints separately to maximize print volume. No supports or brim needed.

Printing Advice

The pre-sliced files contain the following settings:

Bowl:

• Seam set to rear
• 0.20mm (speed)
• Infill 10%

Handle:

• 0.20mm (speed)
• 20% infill

For MMU3:

• Enabled no sparse layers for a reduced wipe tower (this requires the object to be moved away from the tower, keep that in mind if you are changing anything)
• Purge volume set to 360 from black to light colors
• Wipe to this objects infill