Broom made of poop lines

This Broom will allow you to clean all the poop and dirt generated by 3D printing! 🧹 Print is very fast & easy, no support required. You can choose between 3 versions of the handle: classic, elegant and sphere.

How does it work ⚙

This "brush" is made of 4 parts: a handle, an S shape and two threaded parts which has a slightly conical shape, which allows you to apply pressure to the poop lines. This way you will be able to keep the poop lines together. See the animated GIF

How to assemble it 🔨

Step 1: fit your first lines (I used about 250) around the "S" part, you can help by holding them in place with a lace or cable tie

Step 2: hold with a hand the 2 threaded parts around the first lines, beyond the S part

Step 3: screw the handle, holding togheter the threated parts

Step 4: cut the excess first lines with scissors and... you're ready!

Warning!

The first step, that of folding and passing the approximately 250 poop lines into the S-shaped piece is the most difficult. I recommend "tying" the poop lines with a cable or zip tie to keep them tighter. Then you can remove it.