Spine Cable Chain - Ender 3 V3 KE/SE

This is my take on a spine style cable chain for the Ender 3 V3 KE/SE. I was going for a very specific "look," and I think I've achieved it.

I've designed components for all the various mounting points.

There are three mounts for the main cable coming out of the tool head: one for the tool head, one for the base, and a bridge for the X-axis gap.

For the bed cable, there are 2 mounts: The clamp for the bed and a mount for the backside base of the printer. 

You'll need 2 M3 screws and nuts to secure it. I originally had clips designed but prefer it clamped down hard - so I opted for these. Length doesn't really matter. It won't touch anything.

Join my discord! https://discord.gg/uYBuFXUmcU

Everything in this project can be printed without supports except the bed cable base mount. This should be printed, as shown in the picture below, with a small support painted on for the ball joint. 

You will need to print:

• 46 Main Links - This can be any combination of the “Standard” Mount + The zip tie or claw variants. Those are optional but handy if you have some extra wiring to hide.
• 20 Bed Chain Links 
• 1 of each of the various mount

I recommend printing everything with variable layer height. It really helps with the overhangs.
 

Print Settings: 

• Lots of walls

Thats it! Please enjoy!