Crocs Shoes - Fully 3d-printed

Fully 3d printed crocs shoes

• “CrocsL/R” and “Holder” printed with Overture TPU (https://amzn.to/40n8I0D) (390 g)
  • for the shoes I used:
    • 2 walls
    • 15% infill (gyroid)
  • for the holder
    • 2 walls
    • 5% infill (monotonic)
• “Mount1/2” printed with PLA or PETG (5g)
  • 3 walls
  • 20% infill (cubic)

For Bambu Studio File: https://makerworld.com/en/models/425034#profileId-328538

Important notes:

• I reworked the snap buttons so it should work better now
• It is for EU shoe size number 42, but you can scale it to your size:

• There are two ways to print this:

1. Use a textured PEI bed and print it standing up without support
2. Or use another not so sticky bed and print it standing up with support

-------------

If you want to sell printed parts from my designs or want to get the .step files of my models you can become a member of my Patreon: https://www.patreon.com/c/makerversedesigns

You like my free 3D models? I also create custom 3D designs for 3D printing: https://www.fiverr.com/s/yvRqgr6 

-------------

Have fun with it and leave a like if you like it!

If there are any suggestions for improvement, feel free to write a comment.