Traffic Cone (1/10 Scale)

Yet another traffic cone. This one is in 1/10 scale and is modeled as close to the real thing as possible.

The width of the base is 31 mm and the total height of the cone is 55 mm.

There are two version, one has small perforations on the top of the base through which cone protrusions go through. If printing the cone with flexible filament use the version without the perforations, as the details are too small to print well.

For one complete traffic cone you need to print three parts, the cone itself, base top and the base bottom.

Print instructions

Printer Brand: Prusa
Printer: i3 MK2S
Rafts: No
Supports: No
Resolution: 0.2
Infill: 20%

Notes:

I printed the cone from NinjaFlex, so it is more like the real thing and the base from PLA.

Bottom of the base could be printed from flexible filament as well to make it less prone to sliding around.