November 1, 2021
Description
This is a pass through that allows filament to pass through a barrier up to 10mm thick. The center ball allows for the filament path to adjust and prevent kinks at the pass through.
M6x1 screw threads to fit a bowden tube coupler on one side. Square shoulders on opposite side to easily tighten coupler against center ball.
Center pillar is 20mm diameter, 5mm holes for mounting screws/bolts.
Prints in place without supports in about 30 minutes with stock accelerations, 0.2mm layers, and 0.4mm nozzle.
License:
Creative Commons — Attribution
7
Rextruction
