One inch clamp - screw foot

This little screw foot is a add-on to my one-inch-clamp published here:
https://www.prusaprinters.org/prints/84103-one-inch-clamp-25mm-opening

Simply print this part in the uploaded orientation with 100% infill. Screw it to the tip of the screw and you are done. You can secure it with a drop of glue of course, but for normal usage that should not be necessary.

The height of the foot is 5mm, so the remaining opening of the clamp will be reduced to 20mm.

Have fun with the clamp, whatever usage you have for it and happy printing!